Bash Argsparse Library. More...

Functions
	__argsparse_parse_options_valuecheck (option, value)
	Check a value given to an option. More...

	__argsparse_set_option (option)
	Resolv option-specific setter function and invoke it. More...

	__argsparse_values_array_identifier (option)
	Prints the name of the array containing all user-declared acceptable values for an option. More...

	argsparse_allow_no_argument (string)
	Allow empty command lines to run. More...

	argsparse_check_option_type (type, value)
	Check if a value matches a given type. More...

	argsparse_describe_parameters (param...)
	Describe non-option positionnal parameters. More...

	argsparse_get_cumulative_array_name (option)
	Print the name of the array used for "cumulative" and "cumulativeset" options. More...

	argsparse_has_option_property (option, property)
	Determine if an option has a property. More...

	argsparse_is_option_set (option)
	Return True if an option has been set on the command line. More...

	argsparse_maximum_parameters (unsigned_int)
	Set the maximum number of non-option parameters expected on the command line. More...

	argsparse_minimum_parameters (unsigned_int)
	Set the minimum number of non-option parameters expected on the command line. More...

	argsparse_option_description (option)
	Prints to stdout the description of given option. More...

	argsparse_option_to_identifier (option)
	Give the identifier name associated to an option. More...

	argsparse_parse_options (parameters...)
	Parse program options. More...

	argsparse_report (option...)
	Prints a basic report of all passed options. More...

	argsparse_set_alias (option)
	"alias" property specific option-setting hook. More...

	argsparse_set_cumulative_option (option, value)
	"cumulative" property specific option-setting hook. More...

	argsparse_set_cumulativeset_option (option, value)
	"cumulativeset" property specific option-setting hook. More...

	argsparse_set_option (option, value)
	Default option-setting hook. More...

	argsparse_set_option_property (property, option...)
	Enable a property to a list of options. More...

	argsparse_set_option_with_value (option, value)
	"value" property specific option-setting hook. More...

	argsparse_set_option_without_value (option)
	The option-setting hook for options not accepting values. More...

	argsparse_usage ()
	A generic help message generated from the options and their descriptions. More...

	argsparse_usage_long ()
	Fully describe and program and its options to the end-user. More...

	argsparse_usage_short ()
	Print a short description of the program syntax. More...

	argsparse_use_option (optstring, description, property...)
	Define a new option. More...

	set_option_help ()
	Default trigger for –help option. More...

	usage ()
	Default usage function. More...

Variables
Integer	__argsparse_maximum_parameters = 1000000
	Internal use only. More...

Integer	__argsparse_minimum_parameters = 0
	Internal use only. More...

String AssociativeArray	__argsparse_options_default_values
	Internal use only. More...

String AssociativeArray	__argsparse_options_descriptions
	Internal use only.

String AssociativeArray	__argsparse_options_properties
	Internal use only.

String Array	__argsparse_parameters_description
	Internal use only.

String AssociativeArray	__argsparse_short_options
	Internal use only.

String AssociativeArray	__argsparse_tmp_identifiers
	Internal use.

ReadOnly String	argsparse_pgm
	The name of the program currently using argsparse. More...

String	argsparse_usage_description
	Usage description additionnal string. More...

ReadOnly String	ARGSPARSE_VERSION = 1.7
	argsparse version number

String AssociativeArray	program_options
	Options values. More...

String Array	program_params
	Positionnal parameters of the script. More...

Detailed Description

Bash Argsparse Library.

Author: Damien Nadé bash-.nosp@m.args.nosp@m.parse.nosp@m.@liv.nosp@m.na.or.nosp@m.g

Copyright: WTFPLv2

Version: 1.7

URL: https://github.com/Anvil/bash-argsparse

Purpose: To replace the option-parsing and usage-describing functions commonly rewritten in all scripts.

Note: This library is implemented for bash version 4. Prior versions of bash will fail at interpreting that code.; The extglob shell option will be enabled and posix mode will be disabled when loading the library. Changing those settings afterwards will make the library execution fail.

Usage: Use the argsparse_use_option() function to declare your options with their single letter counterparts, along with their description.

: The argsparse_use_option() syntax is:
* argsparse_use_option "optstring" "option description string" \

* [ "property" ... ] [ "optional default value" ]

*

: An "optstring" is of the form "som=estring:". This would declare a long option named somestring. The ending ":" is optional and, if present, means the long option expects a value on the command line. The "=" char is also optional and means the immediatly following letter is the short single-letter equivalent option of –something.

: The "something" string must only contains ASCII letters/numbers/dash/underscore characters.

Note: What is referred later as "option" or "option name" (or even "long option name") is the optstring without the ':' and '=' characters.

Options may have properties.

Properties are set either at option declarations through the argsparse_use_option() function, or using the argsparse_set_option_property() function The currently supported properties are:

"hidden"
An hidden option will not be shown in usage.
"mandatory"
An option marked as mandatory is required on the command line. If a mandatory option is omited by the user, usage() will be triggered by argsparse_parse_options().
"value"
On the command line, the option will require a value. Same effect if you end your optstring with a ':' char.
"default:<defaultvalue>"
The default value for the option.
"short:<char>"
The short single-letter equivalent of the option.
"type:<typename>"
Give a type to the option value. User input value will be checked against built-in type verifications or the "check_type_<typename>" function. You cannot override a built-in type. Built-in types are:
* file directory pipe terminal socket link char unsignedint uint

* integer int hexa ipv4 ipv6 ip hostname host portnumber port

* username group date

*
"exclude:<option> <option>"
The exclude property value is a space-separated list of other options. User wont be able to provided two mutually exclusive options on the command line.
e.g: if you set exclude property for the –foo option this way:
argsparse_set_option_property "exclude:opt1 opt2" foo

Then –opt1 and –foo are not allowed on the same command line invokation. And same goes for –opt2 and –foo. This foo exclude property setting wouldnt make –opt1 and –opt2, mutually exclusive though.
"alias:<option> <option>"
This property allows an option to set multiple other without-value options instead. Recursive aliases are permitted but no loop detection is made, so be careful.
e.g: if you declare an option 'opt' like this:
argsparse_use_option opt "my description" "alias:opt1 opt2"

Then if the user is doing –opt on the command line, it will be as if he would have done –opt1 –opt2
cumulative
Implies 'value'. Everytime a cumulative option "optionname" is passed on the command line, the value is stored at the end of an array named "cumulated_values_<optionname>".
e.g: for a script with an opt1 option declared this way:
argsparse_use_option opt1 "some description" cumulative

and invoked with:
--opt1 value1 --opt1 value2

after argsparse_parse_options(), "${cumulated_values_opt1[0]}" will expand to value1, and ${cumulated_values_opt1[1]} will expand to value2.
cumulativeset
Exactly like cumulative, except only uniq values are kept.
e.g: for a script with an opt1 option declared this way:
argsparse_use_option opt1 "some description" cumulativeset

and invoked with:
--opt1 value1 --opt1 value2 --opt1 value1

after argsparse_parse_options(), "${cumulated_values_opt1[0]}" will expand to value1, and "${cumulated_values_opt1[1]}" will expand to value2. There would be no "${cumulated_values_opt1[2]}" value.
"require:<option> <option>"
Creates a dependency between options. if you declare an option with:
* argsparse_use_option opt1 "something" require:"opt2 opt3"

*

argsparse_parse_options() would return with an error if "--opt1" is given on the commande line without "--opt2" or without "--opt3".

: You can test if an option has a property using the argsparse_has_option_property() function.
argsparse_has_option_property <option> <property>

Parsing positionnal parameters

After the options are declared, invoke the function argsparse_parse_options() with the all script parameters. This will define:

program_params, an array, containing all non-option parameters.
program_options, an associative array. For each record of the array:
- The key is the long option name.
- And about values:
  - If option doesn't expect a value on the command line, the value represents how many times the option has been found on the command line
  - If option does require a value, the array record value is the value of the last occurence of the option found on the command line.
- If option is cumulative (or cumulativeset), the array record value is the number of values passed by the user.
After argsparse_parse_options() invokation, you can check if an option have was on the command line (or not) using the argsparse_is_option_set() function.
e.g:
argsparse_is_option_set "long-option-name"

The "usage()" function: If a 'usage' function is defined, and shall argsparse_parse_options() return with non-zero status, 'usage' will be automatically called.

Note: This library automatically defines a default 'usage' function, which may be removed or overridden by the sourcing program afterwards.

Value setting internal logic

During option parsing, for every option of the form '–optionname' expecting a value:

If there exists an array named "option_<optionname>_values" and the user-given value doesn't belong to that array, then the argsparse_parse_options() function immediately returns with non-zero status, triggering 'usage'.
If the "option_<optionname>_values" array does not exist, but if the option has a type property field, then the value format will be checked agaisnt that type.
If a function named "check_value_of_<optionname>" has been defined, it will be called with the user-given value as its first positionnal parameter. If check_value_of_<optionname> returns with non-zero status, then parse_option immediately returns with non-zero status, triggering the 'usage' function.

Also, still during option parsing and for every option of the form "--optionname":

After value-checking, if a function named "set_option_<optionname>" exists, then, instead of directly modifying the "program_options" associative array, this function is automatically called with 'optionname' as its first positionnal parameter, and, if 'optionname' expected a value, the value is given as the function second positionnal parameter.

About functions return values...: All the functions will return with an error (usually a return code of 1) if called with a wrong number of parameters, and return with 0 if everything went fine.

Function Documentation

__argsparse_parse_options_valuecheck	(	option	,
		value
	)

Check a value given to an option.

If an enumeration has been defined for the option, check against that. If there's no enumeration, but option has a type property, then check against the type. In the end, check against check_value_of_<option> function, if it's been defined.

Parameters

option	an option name.
value	anything.

Return values

0	if value is correct for given option.

__argsparse_values_array_identifier ( option )

Prints the name of the array containing all user-declared acceptable values for an option.

from "opt" or "opt-name" string, prints "option_opt_values[@]" or "option_opt_name_values[@]", unless array is not declared, in which case function will return an error.

Parameters

option an option name.

Return values

1	if array has not been declared
0	else. Array name will be written to stdout.

argsparse_allow_no_argument ( string )

Allow empty command lines to run.

Change argsparse behaviour for empty command lines. Default says "no argument triggers usage".

Parameters

string if (case-insensitive) "yes", "true" or "1", the value is considered as affirmative. Anything else is a negative value.

Return values

0	unless there's more than one parameter (or none).

argsparse_check_option_type	(	type	,
		value
	)

Check if a value matches a given type.

Return True if value is of type type.

Parameters

type	A case-insensitive type name.
value	a value to check.

Return values

0	if the value matches the given type format.

argsparse_describe_parameters ( param... )

Describe non-option positionnal parameters.

Parameters

param...

a list of label describing positionnal parameters. These labels can have special forms such as:

"label?" a single optional non-repeatable parameter
"label+" a non-empty list of parameters
"label*" a potentially-empty list of parameters
"label" a single non-optional non-repeatable parameter

Return values

0

This function has currently 2 purposes:

enhance the "short" usage program description (see argsparse_usage_short())
compute the minimum and maximum numbers of non-option positionnal parameters and will overwrite previous settings using argsparse_minimum_parameters() and argsparse_maximum_parameters().

argsparse_get_cumulative_array_name ( option )

Print the name of the array used for "cumulative" and "cumulativeset" options.

Parameters

option an option name.

For "option-name" usually prints "cumulated_values_option_name".

argsparse_is_option_set ( option )

Return True if an option has been set on the command line.

Parameters

option an option name.

Return values

0	if given option has been set on the command line.

argsparse_option_description ( option )

Prints to stdout the description of given option.

Parameters

option an option name.

Return values

0	if given option has been previously declared.

argsparse_option_to_identifier ( option )

Give the identifier name associated to an option.

Transforms and prints an option name into a string which suitable to be part of a function or a variable name.

Parameters

option an option name.

argsparse_parse_options ( parameters... )

Parse program options.

This function will make option parsing happen, and if an error is detected, the usage() function will be invoked, if it has been defined. If it's not defined, the function will return 1. Parse options, and return if everything went fine.

Parameters

parameters... should be the program arguments.

Return values

0	if the whole option parsing process went fine.
1	if an error is encoutered and usage does not perform an exit.

argsparse_report ( option... )

Prints a basic report of all passed options.

Kinda useful for a –debug, or a –verbose option, this function will print options and their values.

Parameters

option... A list of option name. If omitted all options will be displayed.

Return values

0

argsparse_use_option	(	optstring	,
		description	,
		property...
	)

Define a new option.

Parameters

optstring	an optstring.
description	the option description, for the usage function.
property...	an non-ordered list of keywords. Recognized property keywords are: mandatory: missing option will trigger usage. If a default value is given, the option is considered as if provided on the command line. hidden: option wont show in default usage function. value: option expects a following value. short:c: option has a single-lettered (c) equivalent. exclude:"option1 [ option2 ... ]" option is not compatible with other options option1, option2... cumulative cumulativeset type:sometype The last non-keyword parameter will be considered as the default value for the option. All other parameters and values will be ignored. - might be broken / obsolete and broken

Return values

0	if no error is encountered.
2	if option name is bad (a message will be printed)
3	if option name conflicts with another option (a message will be printed)
4	if a wrong property name is provided. (a message will be printed)

Variable Documentation

ReadOnly String argsparse_pgm

The name of the program currently using argsparse.

Automatically set by argsparse at load time, it contains the basename (path-less but with extension, if any) of the main script. Used internally to print error messages and by usage-related functions, but can be used by the loading script.

AssociativeArray program_options

Options values.

After argsparse_parse_options(), it will contain (if no hook is set for "optionname")

"optionname" -> "value", if "optionname" accepts a value.
"optionname" -> "how many times the option has been detected on the command line", else.

Array program_params

Positionnal parameters of the script.

After argsparse_parse_options(), it will contain all non-option parameters. (Typically, everything found after the '–')

Functions

Variables

Detailed Description

Function Documentation

Variable Documentation